Registrate!


Login to lomasbarato


Forgot password?

Home Creality D® CR Mini DIY Kit de Impresora D Impresión de Currículum

Creality D® CR Mini DIY Kit de Impresora D Impresión de Currículum
product06
product10
product08
Creality D® CR Mini DIY Kit de Impresora D Impresión de Currículum

Creality D® CR Mini DIY Kit de Impresora D Impresión de Currículum importado de China

Impresoras 3D

Consultar precio

Características:


1. Basado en CR-10
, solo demora 5 minutos para instalar y probar

2. Soporta curriculum vitae
 mientras que la energía eléctrica falla.
3. Con talla de impresión grande 
de 
300'220'300mm

.
4. Con módulos altamente integrados, puede imprimir continuamente durante 200 horas.
5. Utilice la ranura en V más nueva para rodamientos lineales, disfrute de una alta precisión y una impresión de poco ruido.
6. Tuerca torcer a mano
7. Un sistema de control de corte clave, fácil de operar
8. Pasó un montón de certificación de calidad.



Especificaciones
Marca Creality 3D
Talla de impresión
300'220'300mm
Precisión de impresión
± 0.1mm
Velocidad de impresión
Noraml: 80mm/s
Máx: 200mm/s

Diámetro de la boquilla
Estándar 0.4mm (Se puede cambiar a 0.3 / 0.2mm)
Materiales
1.75mm PLA, ABS, TPU, cobre, madera, fibra del carbón, color del gradiente etc.
Soporte de software
Cura, Simplify3D, Repetier-host
Formato
STL, OBJ, Amf
Método de impresión
Tarjeta SD (off-line), contacto con PC (one-line
)

Sistema operativo
Linux, Windows, OSX
Talla de la máquina
490'425'500mm
Cable de energía
Con estándar de EU y estándar de US.
Peso neto
7.5KG
Talla del paquete
550'520'230mm
Peso del paquete
10KG

El paquete incluye:


1x Creality 3D® CR-10 Mini DIY Kit de impresoras 3D




I purchased this as my first 3D printer after selecting it by watching YouTube reviews .
It arrived well-packed , and requiring little assembly work .
However , I feel that the written instructions are not comprehensive enough .
The best guide to initial set-up and testing I found in this 11min video: https://www .
youtube .
com/watch?v=Cdkb_ILCptw All the tools required are provided .
I was surprised that the fine nozzle-cleaner was loose in the box , and I nearly threw it away by mistake .
The photos show the test-piece being printed from the SD-card supplied .
Note the four corner-squares of masking tape , which I used to set the clearance between the hot-bed and the nozzle once I'd disabled the stepper motors .
There is very little clearance-gap between the z-axis lead-screw and the filament incoming to the extruder .
I loosened the four bolts for the extruder stepper , and twisted it clockwise whilst I re-tightened them in order to make this gap as large as possible .
I might change this arrangement by making a bracket to hold the filament slightly further away .
The larger picture shows my supply of PLA reels in 19-ltr Really-Useful boxes on the shelf above .
Each box contains a large container of deliquescent crystals to lower humidity .
Although the motor noise is bearable , I aim to build a polycarbonate enclosure around my printer .
This will also help keep the ambient temperature high enough to print ABS .
Read moreHide...Leer mas

Compra verificada

Ver oferta



Ver ofertas






Este es el producto mejor valorado!



Ver oferta






Hay un producto mas barato!

Mini DIY Montado Escritorio Impresora D Talla de Impresora mm Soporta Desconectado --> Consiguelo por menos .

Ver oferta






Mira, compara, compra y se feliz porque te lo mereces!

Ya sabes donde comprar Mini DIY Montado Escritorio Impresora D Talla de Impresora mm Soporta Desconectado mas baratos, te ofrecemos una comparativa con todas las opiniones y reviews con lo mejor desde china

delomasbarato.com
Opiniones Creality D® CR Mini DIY
Descripcion

4 Opiniones Creality D® CR Mini DIY Kit

5.0 de 5

Ver ofertas

I purchased this as my first 3D printer after selecting it by watching YouTube reviews .
It arrived well-packed , and requiring little assembly work .
However , I feel that the written instructions are not comprehensive enough .
The best guide to initial set-up and testing I found in this 11min video: https://www .
youtube .
com/watch?v=Cdkb_ILCptw All the tools required are provided .
I was surprised that the fine nozzle-cleaner was loose in the box , and I nearly threw it away by mistake .
The photos show the test-piece being printed from the SD-card supplied .
Note the four corner-squares of masking tape , which I used to set the clearance between the hot-bed and the nozzle once I'd disabled the stepper motors .
There is very little clearance-gap between the z-axis lead-screw and the filament incoming to the extruder .
I loosened the four bolts for the extruder stepper , and twisted it clockwise whilst I re-tightened them in order to make this gap as large as possible .
I might change this arrangement by making a bracket to hold the filament slightly further away .
The larger picture shows my supply of PLA reels in 19-ltr Really-Useful boxes on the shelf above .
Each box contains a large container of deliquescent crystals to lower humidity .
Although the motor noise is bearable , I aim to build a polycarbonate enclosure around my printer .
This will also help keep the ambient temperature high enough to print ABS .
Read moreHide...Leer mas

Creality D® CR Mini DIY Kit de Impresora D Impresión de Currículum

5 / 5

Awesome printer .
it took one hour to assemble and one more to fix the bed .
couldn't wish more for such a low cost thx banggood!...Leer mas

Creality D® CR Mini DIY Kit de Impresora D Impresión de Currículum

5 / 5

Bought this printer after so many comparison researches Because this is my first 3d printer .
Received it via Free DPEX express shipping service and had to pay around $70 as tax that's not a problem .
This printer worked without any mods or tweekings .
Just assembled the 2 parts , leveled the bed and good to go .
it's came with 250g PLA roll which is really nice .
and it's came with all the acc (include glass plate , sd card , print remover , data clabe , sd card reader , Zip tize and extra screws ) .
No 3d printed parts and built using 95% aluminum and few molded plastic parts .
Prints are really good quality and bed & nozzle heating is not too slow .
overall Really good printer as his big brother CR 10 .
YOu can view all my printing projects here > facebook .
com/kanishkathenoob Read moreHide...Leer mas

Creality D® CR Mini DIY Kit de Impresora D Impresión de Currículum

5 / 5

Bonjour c est ma première imprimante elle es top top top je recommande...Leer mas

Creality D® CR Mini DIY Kit de Impresora D Impresión de Currículum

5 / 5

Ver ofertas
Echa un vistazo

Productos destacados


JGAURORA® A DIY Kit de impresora D Soporte de reanudación de impresión y detección de run out
JGAURORA® A DIY Kit de impresora D Soporte de reanudación de impresión y detección de run out

I am very happy with the product .
Delivery was quick .
I have only one complaint: The software included on the flash-drive is faulty and could not be installed .
It gave me error codes when I tried to install it .
I found a place on the internet where I could download the software and the problem is now solved .
The software is working fine .
This is a great product and value for money! Johan...Leer mas

Compra verificada

Creality D® CR DIY D Kit de impresora mm mm Soporte de
Creality D® CR DIY D Kit de impresora mm mm Soporte de

this 3d has appropiate size 210 210 210 mm easy to setup and install just 15 min .
and good to run first print overall quite impress with machine...Leer mas

Compra verificada

Anet® E DIY Kit de Impresora D  mm Tamaño Impresión Soporte Impresión Off Line mm mm
Anet® E DIY Kit de Impresora D mm Tamaño Impresión Soporte Impresión Off Line mm mm

headbed is damaged on different positions and doesn´t work...Leer mas

Compra verificada

BIQU Magician Impresora D premontada de mm Tamaño de impresión con soporte
BIQU Magician Impresora D premontada de mm Tamaño de impresión con soporte

It's a nice printer , but its small .
It prints nice at 40 mm/s It needs alot of tweaking to get it to work right , but if it works , it works good .
The fillament holder is crap , so make a new one .
It can only hold spools of 250 grams .
the way it's oriantated it tangels the fillament quite fast .
The auto-leveling is a nice touch .
So if you know how to tweak it , you have a very nice printer for a small price , but keep in mind that a build plate isn't big either .
...Leer mas

Compra verificada