Registrate!


Login to lomasbarato


Forgot password?

Home Geeetech® Prusa I M IN OUT FDM D Impresora Kit de bricolaje

Geeetech® Prusa I M IN OUT FDM D Impresora Kit de bricolaje
product06
product10
product08
Geeetech® Prusa I M IN OUT FDM D Impresora Kit de bricolaje

Geeetech® Prusa I M IN OUT FDM D Impresora Kit de bricolaje importado de China

Impresoras 3D

Consultar precio





Videos de instalación:

https://www.youtube.com/playlist?list=PLODCkot3GrihN2yzDrAGAwSVQ-cbIUObs


Nota:




Por defecto, entregamos el enchufe AU o el enchufe UE (almacén CN y almacén estadounidense), si no es adecuado, y


Puede utilizar su propio adaptador de enchufe o tira de enchufe.



Y el defecto entregue el enchufe de la UE en el almacén de la UE.


Característica:


1. Auto-desarrollado sistema de control basado en el procesador STM32, emparejado con el ARM Coretex M3, corriendo una frecuencia dominante de 72MHz, mejorando en gran medida el rendimiento general de impresión.
2. Firmware optimizado, con nueva característica de ajustar la proporción de la velocidad de alimentación de dos extrusores a los elementos de impresión con color de mezcla o gradiente de colores.
3. El hotend conmutable 2-in-1-out, funciona como una paleta de colores, proporcionando una nueva forma de imprimir elementos en dos colores diferentes o colores gradientes.
4. 280x210x200mm volumen de impresión, capaz de imprimir modelos más grandes que la mayoría de las impresoras I3 en el mercado.
5. Hasta la precisión de la impresión de 0.1mm, emparejando los competidores que cuesta 10 veces más en el mercado.
6. Con el regulador del LCD 2004 y el lector de tarjetas del SD, apoyan la impresión independiente.
7. Super-plana superficie de impresión de aleación de aluminio para una mejor adherencia.
8. Filamentos de impresión 3D compatibles: PLA, ABS

Especificaciones de impresión
Tecnología de impresión FDM
Generar volumen 280 x 210 x 200mm
Resolución de impresión 0.1-0.3mm
Velocidad de impresión 60-110 mm / s
Diámetro del filamento 1.75mm
Diámetro de la tobera 0.4mm
Tipo de filamento PLA, ABS
Software
Sistema operativo Windows / Mac / Linux
Software de control Repetier-Host, Printrun
Formato de archivo .STL, Código G
Temperatura
Temperatura máxima de la cama calentada Aproximadamente 110 ° C
Temperatura máxima del extrusor Alrededor de 240 ° C
Fuente de alimentación
Entrada 115 V / 1,5 A o 230 V / 0,75 A
Salida DC24V / 0-15A
Conectividad USB, tarjeta SD (soporte de impresión independiente)
Mecánico
Marco Placa acrílica cortada con láser de 8 mm de grosor
Crear plataforma Aleación de aluminio super plano + calor
XYZ Rods Resistente al desgaste, acero inoxidable
Motores paso a paso Ángulo de paso de 1.8 ° con 1/16 micro-stepping
Dimensiones físicas y peso
Dimensión de la máquina 510 x 450 x 450 mm
Caja de envío Dimensión 510 x 470 x 155 mm
Peso neto de la máquina 9.5kg
Peso de envío de la máquina 10.5kg


Descarga del archivo (Click to open):

How to install the firmware for GTM32
Building Instructions of Geeetech Prusa I3 M201.pdf
BOM.doc
CE-EMC Certificate.jpg
CE-LVD Certificate.jpg
FCC Certificate.jpg
ROHS Certificate.jpg



El paquete incluye:

1 x Geeetech Prusa I3 M201 3D impresora kit de bricolaje


Ive just finished assembling my 3D printer .
It was Quick Easy and every component accounted for .
Havent uploaded firmware yet nor printed something but so far so good...Leer mas

Compra verificada

Ver oferta



Ver ofertas






Quiero el mejor valorado!



Ver oferta






Hay un producto mas barato!

Mini DIY Montado Escritorio Impresora D Talla de Impresora mm Soporta Desconectado --> Consiguelo por menos .

Ver oferta






Mira, compara, compra y se feliz porque te lo mereces!

Ya sabes donde comprar Mini DIY Montado Escritorio Impresora D Talla de Impresora mm Soporta Desconectado mas baratos, te ofrecemos una comparativa con todas las opiniones y reviews con lo mejor desde china

delomasbarato.com
Opiniones Geeetech® Prusa I M IN
Descripcion

4 Opiniones Geeetech® Prusa I M IN OUT

3.9 de 5

Ver ofertas

Ive just finished assembling my 3D printer .
It was Quick Easy and every component accounted for .
Havent uploaded firmware yet nor printed something but so far so good...Leer mas

Geeetech® Prusa I M IN OUT FDM D Impresora Kit de bricolaje

5 / 5

I received it undamaged as it came from a us company .
all parts were there it was a little different than the instructions I printed off .
but I later found the updated one .
Not impressed with the mixing head .
if you have yellow and black your yellow will be not as clean cause it will mix 6% black in with the yellow .
It really needs a part cooling fan and seems since there are less of this model it is harder to find one that fits perfectly .
I had to make up one to work with it .
my issues 1 .
z would slip till I loosened some screws to release binding plus moly lube .
2 .
i had problems with my hot end fan not getting full 12v till I unplugged the extruder fans .
3 .
techsupport never answers my emails .
4 .
can't figure out how to control the part cooling fan via the controller .
I just run it on a separate power pack .
5 .
LCD screen will go black from time to time .
6 .
I get some communication error sometimes that will pause the print for 30 seconds then start up again .
7 .
think the board fan needs better ducting to improve cooling .
8 .
y will skip steps if I increase the print speed .
I need to lower infill really slow to avoid bad steps .
it will skip on real short jittery type print spots .
9 .
z rod couplers seem to add slot of wobble to the axis .
needs better alignment couplers .
things I added or want to add led lighting part cooling fan board fan and duct z wobble fix better couplers bed level single extruder or 2 separate extruders all metal extruder upgrade Read moreHide...Leer mas

Geeetech® Prusa I M IN OUT FDM D Impresora Kit de bricolaje

4 / 5

Z axe doesn't works .
I had to change motors , guides and threaded bars...Leer mas

Geeetech® Prusa I M IN OUT FDM D Impresora Kit de bricolaje

4 / 5

A few problems during assembly parts needed to be modified .
Z axis motors not enough to raise and lower print head .
Heated bed doesn't work .
If you are new to 3D printing don't start with this kit .
I have ordered 2 new stepper motors to try and get this 3D printer working .
I don't know how to fix the heated bed as the same size bed can not be purchased .
...Leer mas

Geeetech® Prusa I M IN OUT FDM D Impresora Kit de bricolaje

3 / 5

Ver ofertas
Echa un vistazo

Productos destacados


JGAURORA® A DIY Kit de impresora D Soporte de reanudación de impresión y detección de run out
JGAURORA® A DIY Kit de impresora D Soporte de reanudación de impresión y detección de run out

I am very happy with the product .
Delivery was quick .
I have only one complaint: The software included on the flash-drive is faulty and could not be installed .
It gave me error codes when I tried to install it .
I found a place on the internet where I could download the software and the problem is now solved .
The software is working fine .
This is a great product and value for money! Johan...Leer mas

Compra verificada

Creality D® CR DIY D Kit de impresora mm mm Soporte de
Creality D® CR DIY D Kit de impresora mm mm Soporte de

this 3d has appropiate size 210 210 210 mm easy to setup and install just 15 min .
and good to run first print overall quite impress with machine...Leer mas

Compra verificada

Anet® E DIY Kit de Impresora D  mm Tamaño Impresión Soporte Impresión Off Line mm mm
Anet® E DIY Kit de Impresora D mm Tamaño Impresión Soporte Impresión Off Line mm mm

headbed is damaged on different positions and doesn´t work...Leer mas

Compra verificada

Creality D® CR Mini DIY Kit de Impresora D Impresión de Currículum
Creality D® CR Mini DIY Kit de Impresora D Impresión de Currículum

I purchased this as my first 3D printer after selecting it by watching YouTube reviews .
It arrived well-packed , and requiring little assembly work .
However , I feel that the written instructions are not comprehensive enough .
The best guide to initial set-up and testing I found in this 11min video: https://www .
youtube .
com/watch?v=Cdkb_ILCptw All the tools required are provided .
I was surprised that the fine nozzle-cleaner was loose in the box , and I nearly threw it away by mistake .
The photos show the test-piece being printed from the SD-card supplied .
Note the four corner-squares of masking tape , which I used to set the clearance between the hot-bed and the nozzle once I'd disabled the stepper motors .
There is very little clearance-gap between the z-axis lead-screw and the filament incoming to the extruder .
I loosened the four bolts for the extruder stepper , and twisted it clockwise whilst I re-tightened them in order to make this gap as large as possible .
I might change this arrangement by making a bracket to hold the filament slightly further away .
The larger picture shows my supply of PLA reels in 19-ltr Really-Useful boxes on the shelf above .
Each box contains a large container of deliquescent crystals to lower humidity .
Although the motor noise is bearable , I aim to build a polycarbonate enclosure around my printer .
This will also help keep the ambient temperature high enough to print ABS .
Read moreHide...Leer mas

Compra verificada