Creality D® CR Mini DIY Kit de Impresora D Impresión de Currículum
I purchased this as my first 3D printer after selecting it by watching YouTube reviews .
It arrived well-packed , and requiring little assembly work .
However , I feel that the written instructions are not comprehensive enough .
The best guide to initial set-up and testing I found in this 11min video:
All the tools required are provided .
I was surprised that the fine nozzle-cleaner was loose in the box , and I nearly threw it away by mistake .
The photos show the
test-piece being printed from the SD-card supplied .
Note the four corner-squares of masking tape , which I used to set the clearance between the hot-bed and the nozzle once I'd disabled the stepper motors .
There is very little clearance-gap between the z-axis lead-screw and the filament incoming to the extruder .
I loosened the four bolts for the extruder stepper , and twisted it clockwise whilst I re-tightened them in order to make this gap as large as possible .
I might change this arrangement by making a bracket to hold the filament slightly further away .
The larger picture shows my supply of PLA reels in 19-ltr Really-Useful boxes on the shelf above .
Each box contains a large container of deliquescent crystals to lower humidity .
Although the motor noise is bearable , I aim to build a polycarbonate enclosure around my printer .
This will also help keep the ambient temperature high enough to print ABS .
Read moreHide...Leer mas