Registrate!


Login to lomasbarato


Forgot password?

Home Máquina de grabado láser EleksMaker® EleksLaser A Pro mW Impresora láser CNC

Máquina de grabado láser EleksMaker® EleksLaser A Pro mW Impresora láser CNC
product06
product10
product08
Máquina de grabado láser EleksMaker® EleksLaser A Pro mW Impresora láser CNC

Máquina de grabado láser EleksMaker® EleksLaser A Pro mW Impresora láser CNC importado de China

Impresoras 3D

Consultar precio

Cómo montar la máquina láser:



¡Cuán fresco puede ser la máquina láser!
(Tomando 1.6W A5
Máquina láser como ejemplo.)






???????!...Leer mas

Compra verificada

Ver oferta



Ver ofertas






Quiero el mejor valorado!



Ver oferta






Hay un producto mas barato!

Mini DIY Montado Escritorio Impresora D Talla de Impresora mm Soporta Desconectado --> Consiguelo por menos .

Ver oferta






Mira, compara, compra y se feliz porque te lo mereces!

Ya sabes donde comprar Mini DIY Montado Escritorio Impresora D Talla de Impresora mm Soporta Desconectado mas baratos, te ofrecemos una comparativa con todas las opiniones y reviews con lo mejor desde china

delomasbarato.com
Opiniones Máquina de grabado láser EleksMaker®
Descripcion

2 Opiniones Máquina de grabado láser EleksMaker® EleksLaser

4.0 de 5

Ver ofertas

???????!...Leer mas

Máquina de grabado láser EleksMaker® EleksLaser A Pro mW Impresora láser CNC

5 / 5

The engraver was neatly packed and after following a video tutorial the engraver was assembled .
There is a problem with the hardware as my 5 .
5W laser comes always on when I power up the 12V to the machine .
...Leer mas

Máquina de grabado láser EleksMaker® EleksLaser A Pro mW Impresora láser CNC

3 / 5

Ver ofertas
Echa un vistazo

Productos destacados


JGAURORA® A DIY Kit de impresora D Soporte de reanudación de impresión y detección de run out
JGAURORA® A DIY Kit de impresora D Soporte de reanudación de impresión y detección de run out

I am very happy with the product .
Delivery was quick .
I have only one complaint: The software included on the flash-drive is faulty and could not be installed .
It gave me error codes when I tried to install it .
I found a place on the internet where I could download the software and the problem is now solved .
The software is working fine .
This is a great product and value for money! Johan...Leer mas

Compra verificada

Creality D® CR DIY D Kit de impresora mm mm Soporte de
Creality D® CR DIY D Kit de impresora mm mm Soporte de

this 3d has appropiate size 210 210 210 mm easy to setup and install just 15 min .
and good to run first print overall quite impress with machine...Leer mas

Compra verificada

Anet® E DIY Kit de Impresora D  mm Tamaño Impresión Soporte Impresión Off Line mm mm
Anet® E DIY Kit de Impresora D mm Tamaño Impresión Soporte Impresión Off Line mm mm

headbed is damaged on different positions and doesn´t work...Leer mas

Compra verificada

Creality D® CR Mini DIY Kit de Impresora D Impresión de Currículum
Creality D® CR Mini DIY Kit de Impresora D Impresión de Currículum

I purchased this as my first 3D printer after selecting it by watching YouTube reviews .
It arrived well-packed , and requiring little assembly work .
However , I feel that the written instructions are not comprehensive enough .
The best guide to initial set-up and testing I found in this 11min video: https://www .
youtube .
com/watch?v=Cdkb_ILCptw All the tools required are provided .
I was surprised that the fine nozzle-cleaner was loose in the box , and I nearly threw it away by mistake .
The photos show the test-piece being printed from the SD-card supplied .
Note the four corner-squares of masking tape , which I used to set the clearance between the hot-bed and the nozzle once I'd disabled the stepper motors .
There is very little clearance-gap between the z-axis lead-screw and the filament incoming to the extruder .
I loosened the four bolts for the extruder stepper , and twisted it clockwise whilst I re-tightened them in order to make this gap as large as possible .
I might change this arrangement by making a bracket to hold the filament slightly further away .
The larger picture shows my supply of PLA reels in 19-ltr Really-Useful boxes on the shelf above .
Each box contains a large container of deliquescent crystals to lower humidity .
Although the motor noise is bearable , I aim to build a polycarbonate enclosure around my printer .
This will also help keep the ambient temperature high enough to print ABS .
Read moreHide...Leer mas

Compra verificada